Latest Articles

Effect of joining temperature on microstructure and properties of Mg/Al diffusion bonded joints
Zhou Zheng, Ding Yunlong, Shao Wenjie, Zhang Encheng
DOI: 10.12073/j.cw.20240117032
Abstract FullText HTML PDF
Friction time effect on joint strength of AISI 316 using continuous drive friction welding
Ramzi Lechelah, Ammar Jabbar Hassan, Taoufik Boukharouba, Billel Cheniti, Brahim Belkessa, Nacer-Eddine Titouche, Djamel Miroud
DOI: 10.12073/j.cw.20240705022
Abstract FullText HTML PDF
Fitting analysis and optimization of MIG welding current for stainless steel
Wang Quanyong, Wu Xiaojuan
DOI: 10.12073/j.cw.20240528015
Abstract FullText HTML PDF
Microstructure and mechanical properties of TC4 titanium alloy laser beam welded joint
Zhang Shuquan, Wang Shouwu, Wang Liyue, Xu Kai, Ge Junwei, Zhang Wei
DOI: 10.12073/j.cw.20230921001
Abstract FullText HTML PDF
Forming characteristics of triple-wire gas indirect arc surfacing
Li Boyang, Ba Xianli, Xu Guomin, Chen Shuaishuai, Liu Liming
DOI: 10.12073/j.cw.20240401005
Abstract FullText HTML PDF
Effect of materials on the forming characteristics of laser-MIG hybrid welding process with filler wire for aluminum alloy
Chang Yunfeng, Lei Zhen, Teng Bin, Liu Xiaofang, Zhang Guanxing, Xue Hangyan, Li Yunpeng
Abstract FullText HTML PDF
Effect of reinforcement particle size on microstructure and impact toughness of iron-matrix composites
Huang Yanqin, Cheng Yongzhen, Lu Yuanyuan, Liu Yu, Liu Dejian
DOI: 10.12073/j.cw.20240728028
Abstract FullText HTML PDF
Research on the process and melt pool flow mechanism of laser cladding Inconel 625
Hu Xiaofeng, Pan Jiajing, An Zhou, Lv Xingyue, Lu Kun, Wang Zifu
Abstract FullText HTML PDF
Accuracy validation of the deformation results of the inherent strain method based on vacuum vessel mockup
Zhong Yaqi, Liu Zhihong, Ma Jianguo, Wu Jiefeng, Ji Haibiao, Zhou Peng, Li Chengwen
DOI: 10.12073/j.cw.20240619018
Abstract FullText HTML PDF
Effect of Co particles combined with rotating magnetic field on microstructure and properties of Sn35Bi/Cu joint
Xue Hangyan, Cheng Donghai, Zhang Guanxing, Li Zhengbing, Dong Hongwei
DOI: 10.12073/j.cw.20240117001
Abstract FullText HTML PDF
Hybrid channeling of Cu-Al cold plates for thermal management devices
Hu Shengnan, Xie Yuming, Wang Shenglong, Meng Xiangchen, Huang Yongxian
DOI: 10.12073/j.cw.20240522012
Abstract FullText HTML PDF
Optimization of parameters and formulation of numerical model employing GRA-TOPSIS based on Taguchi method for friction stir welded 6063-T3 alloy
Ibrahim Sabry, Ahmed Hewidy
DOI: 10.12073/j.cw.20230819010
Abstract FullText HTML
Arc characteristics and properties of a new rotating tungsten GTAW of 5A06 aluminum alloy
Du Rongmao, Fan Yanlong, Sun Yu, Zhang Hongtao, Wu Zecheng
DOI: 10.12073/j.cw.20231213001
Abstract FullText HTML PDF